Высокая температура, высокая прочность, и модуль низкой теплопроводности

The high-temperature, высокая прочность, low-thermal-conduction module has the strength of heavy refractory materials and the heat-insulation effect of lightweight heat-insulating materials. This product is used in rotary kilns with good heat-insulation results, высокая прочность на сжатие, и низкая теплопроводность. Высокая температура, высокая прочность, and low thermal conductivity modules have great potential for development in rotary kilns in the cement industry.

Low thermal conductivity module parameters

Плотность	1.7г/см³
Normal Temperature Compressive Strength	≥50MPa
Heating Permanent Line Change1450℃×12h	≤0.5%
Теплопроводность	W/ m.K
Hot Surface 800℃	0.399
Hot Surface 1100℃	0.411
Load Softening Temperature 0.2MPa×0.6%	1500℃

Application of high-strength high strength, модуль низкой теплопроводности

The temperature of the cold surface of the large-scale rotary kiln in the cement industry is 280-320°C. Since there was no suitable insulation material before, it could not be effectively insulated, resulting in a huge waste of energy. The use of 40-50mm thick high-temperature, высокая прочность, and low-thermal-conduction modules can reduce the temperature of the cold surface of the kiln body by 100°C-130°C.

Внедрение огнеупорной мануфактуры Rongsheng

Компания огнеупорных материалов Rongsheng, ООО. был создан для 20 годы. The factory has been conducting research and development of refractory materials, and at the same time selling огнеупорный кирпич и неформованные огнеупорные материалы. This high-temperature, высокая прочность, low-thermal-conduction module is an environmentally friendly refractory material.