높은 온도, 고강도, 및 낮은 열전도율 모듈

The high-temperature, 고강도, low-thermal-conduction module has the strength of heavy refractory materials and the heat-insulation effect of lightweight heat-insulating materials. This product is used in rotary kilns with good heat-insulation results, 높은 압축 강도, 열전도율이 낮고. 높은 온도, 고강도, and low thermal conductivity modules have great potential for development in rotary kilns in the cement industry.

Low thermal conductivity module parameters

밀도	1.7g/cm3
Normal Temperature Compressive Strength	≥50MPa
Heating Permanent Line Change1450℃×12h	≤0.5%
열 전도성	W/ m.K
Hot Surface 800℃	0.399
Hot Surface 1100℃	0.411
Load Softening Temperature 0.2MPa×0.6%	1500℃

Application of high-strength high strength, low thermal conductivity module

The temperature of the cold surface of the large-scale rotary kiln in the cement industry is 280-320°C. Since there was no suitable insulation material before, it could not be effectively insulated, resulting in a huge waste of energy. The use of 40-50mm thick high-temperature, 고강도, and low-thermal-conduction modules can reduce the temperature of the cold surface of the kiln body by 100°C-130°C.

Rongsheng 내화물 제조소 소개

Rongsheng Refractory Material Co., 주식회사. 위해 설립되었습니다 20 연령. The factory has been conducting research and development of refractory materials, and at the same time selling 내화 벽돌 그리고 형태가 없는 내화물. This high-temperature, 고강도, low-thermal-conduction module is an environmentally friendly refractory material.