Materiales refractarios de carbono de uso común para altos hornos.

Los materiales refractarios de carbono comúnmente utilizados en los altos hornos incluyen principalmente ladrillos de carbono., ladrillos de carbono de grafito, ladrillos de carburo de silicio de grafito, ladrillos y materiales de apisonamiento de carburo de silicio autoadheridos o unidos con nitrógeno.

Advantages of carbon refractory materials for blast furnaces

① High refractoriness (carbon sublimates at 350C), it neither melts nor softens at blast furnace temperature.

② Small thermal expansion coefficient, good volume stability in a wide temperature range.

③ Carbon-saturated molten iron does not wet carbon bricks, and under certain cooling conditions, slag has little erosion on the carbonaceous furnace lining.

④ It has high thermal conductivity and electrical conductivity. It can fully exert the efficiency of the cooler when used in the furnace bottom and furnace hearth, thereby extending the service life of the furnace lining and preventing burn-through.

⑤ It has excellent cutting performance and can be made into special-shaped products with very small dimensional tolerances to meet masonry requirements.

Commonly used blast furnace carbon refractory materials

Silicon carbide bricks

Silicon carbide bricks have good thermal conductivity, small expansion coefficient, high high temperature strength, small creep deformation, good resistance to slag, molten iron erosion and corrosion, and better oxidation resistance than carbonaceous materials. The main problem is to find a binder that resists alkali metal corrosion. There are also silicon carbide refractory materials bonded with nitrides or bonded with themselves. Silicon carbide bricks are preferred to extend the service life of the lower part of the furnace body.

Aluminum carbon brick

Aluminum carbon bricks for blast furnaces are made of high-quality high-alumina bauxite and graphite as the main raw materials, with a small amount of silicon carbide and additives added, and resin as a binder. After being pressed and formed, they are solidified and baked to form products. It has the characteristics of high-temperature resistance, good thermal conductivity, good alkali resistance, baja porosidad, small deviation of external dimensions, and low price. It can be used in blast furnace bosh, furnace waist, cuerpo del horno, iron mouth area, furnace bottom top layer, y otras partes.

Materiales refractarios monolíticos.

Compared with shaped refractory materials, monolithic refractory materials have a simple manufacturing process, convenient use, and plasticity. They are easy to form complex products and are conducive to the mechanization of furnace construction. They are low in cost and have a service life similar to that of refractory bricks. Their refractoriness and chemical stability are close to or reach the level of similar refractory bricks. They can be prefabricated into large blocks, but they must be strictly baked when used, especially at low temperatures, which takes a long time, and the strength at medium temperatures is low. They are easy to peel off when used for a long time at high temperatures.